Heat Gun Safety Checklist – How Not To Burn Yourself

Heat Gun

Heat Gun Safety Checklist – How Not To Burn Yourself

The multi-utilitarian heat gun is an extremely popular tool used in crafts, construction, the automotive industry, and much more. To work the heat gun efficiently and safely, the instructions must be read thoroughly.

Heat guns eject hot air which may even reach 1300° F; hence it is crucial to understand how to operate the heat gun so that precaution may be taken against the risk of serious burns.

Heat guns are generally held in one hand while the other hand can be used to complete the task that is being undertaken. A mandatory safety measure is to wear gloves that provide protection from accidental burns.

The gloves used should be able to resist burns and guard the hands against the hot air that blasts from the nozzle as it can easily be misdirected.

Heat guns are often used to soften matter so that it can be molded into any shape desired or stuck to another object. During the heating process usually, a lot of dangerous fumes are emitted so a well-ventilated work area is essential.

How to Build a Deck

Heat Gun Safety Checklist 2021

When painting or using adhesives most people forget the hazards of toxic fumes produced by these materials when they get hot. Hence a well-ventilated room is desirable.

If the heat gun is used recklessly it may cause the handler severe burns. The heat gun may look like a hairdryer but is definitely not one, so it should never be directed at hair, skin, or clothing for any cause.

The heat gun must be handled with intense care and constant attention must be given to where the hot air is being directed otherwise it could lead to fatal accidents.

If one uses the heat gun responsibly then this tool can provide an immense number of benefits from its various uses. While using the heat gun you must be alert and agile because you do not want to end up with burns neither would you like your object to be burnt.

As hair dryers and heat guns have very similar functions, you can use a hair dryer instead of a heat gun for certain applications. If you are removing labels/stickers, removing candle wax, or similar tasks then a hair dryer can be used instead of a heat gun.

You can use a hair dryer instead of a heat gun, but it won’t work very well. Basic heat guns are mostly used for drying or removing paint, defrosting a refrigerator, or unfreezing locks and water pipes — all tasks which require between 350F to 1150F of heat (via Tools First).

Dremel Tool in 2021

What is a heat gun used for?

heat gun is a device used to emit a stream of hot air, usually at temperatures between 100 °C and 550 °C (200-1000 °F), with some hotter models running around 760 °C (1400 °F), which can be held by hand.

Heat guns are one of the most useful tools available nowadays. One of the many uses that this amazing tool provides is repairing vinyl.

This fantastic use makes up for the price you have to pay for the heat gun, even if it is not used ever again. With the advent of the heat gun, repairing vinyl has become child’s play. A tear in a fresh piece of vinyl furniture can be solved in minutes with a special compound and a dependable heat gun.

The vinyl repair has become simpler with the availability of various compounds that can be used with the heat gun for a perfect repair. If proper care is taken to match the color then distinguishing the repair from the rest of the surface of the furniture is next to impossible.

These compounds come in a vast range of colors and the instructions of usage that comes along with it must be studied well before using the compound. The heat gun is used to hold fast the compound impeccably to the existing vinyl to repair an ugly tear.

It is important to clean up the area and trim any stray strings so that the repair area is smooth and nothing protrudes from it. To make sure that the bonding process isn’t inhibited or affected in any way, a special cleaner that is used to remove any oils or dirt on the surface should be used as a cleansing agent.

Bamboo Flooring

The Best Heat Gun with Reviews 2021

  1. DEWALT D26960K – Best Industrial
  2. Porter-Cable PC1500HG – Best Affordable
  3. Wagner HT1000 – Best Budget
  4. Milwaukee 2688-20 – Best Cordless
  5. Master Appliance Master HG Series
  6. Hitachi RH650V
  7. Black & Decker HG1300

This then is followed by the application of the adhesive and filler compound to the vicinity of the tear. Once the tear and its surrounding area are completely covered with the filling compound, a special textured cloth is to be pressed into the compound; however, it is important to make sure that great care is taken while doing this.

After the cloth has been set in place it is time to use the heat gun. Verify the temperature settings for the compound in use and set the temperature of the heat gun accordingly.

Then direct the flame over the compound to dry it and cure it. To increase the durability of the repair a clear protective coating is generally applied to the treated surface.

Heat guns usually cost a lot less than changing a vinyl object. A simple solution for replacing the vinyl furniture is to just repair it with a heat gun.

Not only is it cheaper but it also can be done in a short period of time and ultimately the tear cannot be distinguished from the rest of the original surface after the repair.

How to Emboss using a Heat Gun in 2021

Embossing is the art of making a raised design by using a heat source. The perfect instrument needed for embossing is the heat gun.

The heat gun can melt crystals into pools of vibrant hues. A simple object can be turned into a piece of art by using the rich color combinations available at hand.

Using the heat gun, a multi-utilitarian instrument, to emboss with, on paper has become a popular craft today.

What these needs are embossing powder and a heat gun to stir the creativity of scrapbook enthusiasts who take pleasure in customizing their very own scrapbook pages.

It is a simple process where you layer the ink and embossing powder on the paper. The powder melts and coats the paper, leaving behind a vivid and unique decorative effect.

This form of art creates layers of rich colors, showing off the variety of hues making it extremely striking.

Embossing powder can be spread over the paper after the paper is stamped with a special kind of wet ink which then holds the powder in its place. However there are two ways of applying the ink, it can either be stamped or patted on with a sponge.

After the ink is applied different colored embossing powders maybe be added on separately or all together and then melted. This is where the heat gun is needed as it melts the powder and transforms it into a shiny, molten end product.

If you want to create a particular shape or effect you may also try using stencils. Clear or colored embossing powder may also be used to attain a different look.

Experimenting with different patterns and shades will bring out the beauty of embossing through the subdued tones contrasting with the vibrant colors.

The splendor of being able to play with colors by means of a simple heat gun is exhilarating. The best part about this is that you never really know what the result will be as you watch the different powders melt and come to life.

Each and every creation will be unique as the heat gun automatically creates its own magic before your eyes. Embossing is a skill that anyone who knows how to use a heat gun can learn.

We’ve compiled this buying guide to identify some of the features and characteristics to look out for.

  1. DIY or Professional. …
  2. Power. …
  3. Adjustable Temperature. …
  4. Adjustable Airflow. …
  5. LCD & LED Displays. …
  6. Temperature Scanners. …
  7. Thermal Cut-out. …
  8. Residual Heat Indicators.

How To Remove Paint Seamlessly Using A Heat Gun

Paint removal is no longer a difficult task with the advent of the heat gun. This handy tool is particularly successful at removing paint from most surfaces if proper care is taken.

The temperature can be regulated to make sure that the area does not become damaged due to overheating. The instructions must be read carefully to know the correct temperature for the type of material you are working with.

It would be best to experiment on any object you would not mind scorching as holding the heat gun too close or for too long over an area causes it to scorch, and you would not want to scorch any valuable furniture.

The heat gun is used to heat the paint as much as required to make it malleable and thereafter it can be scraped off with any stripping tool of your choice.

Gloves should be worn during the healing process and one should make sure to direct the hot air away from one’s hands.

Care must be taken while choosing the stripping tool as it should be compatible with the heat gun so that it can resist higher temperatures.

It is advisable to try it out for some time and gain confidence before you attempt the real task. The heat gun must always be held at a stipulated distance away from the material.

Once the paint starts to soften you must scrape it with care and keep an old towel or rag in hand to wipe off the sticky paint on the stripping tool.

Even the thickest layers of paint can be removed with a heat gun from any surface. The heat gun works especially well on wooden surfaces. An example of such a process would be the restoration of your antique furniture to a state of previous beauty.

Using Heat Guns for Plumbing

The plumbing industry has benefited tremendously from the introduction of the heat gun. This compact and useful tool has become quite indispensable to the plumber, making his job a lot easier.

The number of benefits that a heat gun provides is numerous and so it is extensively used for running and repairing plumbing.

The heat gun speeds up the process of bending PVC pipes which makes plumbing lines run smoother and decreases the number of joins that are required.

Conventionally an elbow would have had to be added at every corner by the plumber, now, however, with the use of a heat gun and a special wire coil, the PVC pipe can easily bend to fit the desired angle.

Using PVC adhesive is an option chosen by few nowadays as the heat gun makes the work faster and easier and also makes it stronger.

Apart from the advantage of not having to wait to let water flow through the glued joints, plumbers also value the absence of the sticky mess produced by most conventional adhesives and cleaners used for making joints.

Joints in a pipeline cannot be completely done away with, sometimes they are necessary but the heat gun has certainly replaced the smelly glues which the plumbers would have otherwise had to use.

The heat gun is used to heat the end of the hose or pipe which is then pushed into the joint piece. Expansion and contraction of the hot plastic serve to make it a much tighter joint.

Underground Irrigation Repair Without Digging

I developed this irrigation repair technique out of desperation. A sprinkler head had launched itself out of the ground right beside me one day and landed in a potted plant. The resulting geyser was spectacular, but the location was horrible!

The area around this particular sprinkler head was surrounded in paving stone and brick, and worse, right up against a fence. To make things harder, I had installed a french-drain only a foot away! The riser’s nipple was missing. Sure enough, a replacement stand-pipe wouldn’t even begin to screw in!

Obviously, the broken off part of the nipple was stuck in the t-connector – deep underground! Before I developed this technique, I would have had to dig lateral trenches about 2′ long on each side of the connector, cut the supply lines off each end of the connector, added a sleeve and spacer, then glued in a replacement t-connector. Not this time! There was too much involved in digging this connector out of the ground!

I have a special purpose tool I’d bought from The Home Depot just for this problem. It’s the PVC variant of an “easy-out.” Unfortunately, it wouldn’t work! I couldn’t get enough pressure (the connector was buried just about the extractor’s full length), and I kept scraping my knuckles against a fence post. The stand-pipe wasn’t PVC, it was vinyl. It was so slick, the knife edges of the extractor wouldn’t bite into the inside edge.

But vinyl melts! I have a 1200 watt heat gun I’d bought for paint stripping. The extractor’s tip is metal and by using this heat gun, I got the extractor’s tip hot. Real hot. Sizzling hot! By pushing the extractor straight down the hole, it gently melted into the broken off nipple – deep underground! I let it set and cool for a few minuets before giving it a twist. Two seconds later, the broken off nipple was extracted!

After screwing in a replacement riser, I cycled the irrigation pump to that zone to rinse out all of the dirt that had fallen into the connector. I put a new sprinkler head on the replacement riser, and guess what? That irrigation repair was done. Not only done, I didn’t have to dig one spade of dirt!

The trick was heating up the extractor’s tip hot enough to melt into the broken off vinyl nipple to get a grip.

A few weeks later, I had a different problem. I had mounted new window boxes along one side wall of my home and wanted to use my in-ground irrigation system to water the new flowers. I had a capped off riser right where I need to place a 4′ riser.

Unfortunately, this was an old steel riser that I’d bumped into several times with the mower, and when I removed the pipe it left the t-connector’s threads stripped and choked with rust-scale! Unlike most of my irrigation repair projects, this line is very shallow. Shallow enough for me to scrape away the top to really see the damage.

There wasn’t anything I could do to thread the new riser into place, I was going to have to replace the t-connector – or maybe not. I have a pretty complete shop and I have metal working tools to tap holes for screw threads, or cut outside threads for bolts. Since I had to go to The Home Depot or Lowe’s anyway for a replacement t-connector, why not see if they had a tool for pipe threads?

The staff at Lowe’s laughed when I asked them for a tool to cut internal 1/2″ pipe thread for an underground PVC t-connector! Their only advice was to dig it up and replace it. No Way! The staff at The Home Depot didn’t laugh out loud, but they also suggested replacement fittings.

I did buy the fittings, but I also found the perfect tool – an 18″ length of 1/2″ steel pipe! Once again, the 1200 watt heat gun came to the rescue. By heating the pipe end, the thread section, I was able to plunge it into the buried t-connector. It sizzled as it sank in and I quickly worked it in deeper as I screwed it into place.

Without letting it sit, I unscrewed the steel pipe to prevent it from welding into place. I repeated this operation several times until all of the pipe’s threaded section was within the t-connector’s nipple.

Guess what? The new replacement 4′ PVC riser threaded itself right in! By using heat, pressure, and steel threads, I was able to partially melt the underground t-connector and cut new threads. Not a spade full of dirt was dug up for this irrigation repair!

Since then, I’ve helped neighbors with their irrigation repair projects that left them amazed – “you can actually cut new threads underground without having to dig” – Wow, thanks Bill, really big thanks!

Not all irrigation repairs can use this technique. Let’s face it, if the t-connector’s nipple or connecting pipes crack or break, you will have to dig. But try this tip first and see if it works. You’ll know within minutes if there’s a more serious problem. You’ll get wet standing there, but you’ll quickly see upwelling around the sprinkler head in operation if there’s a broken pipe or cracked nipple. Oh well, at least you gave it a try!

I’ve had this cheap $20 heat gun for more than twenty years. Not only does it do a great job lifting paint, I’ve used it for boat electrical repairs (heat-shrink tubing), removing self-adhesive vinyl tile, contact paper, and sanding disks, and even starting fires in my charcoal pit. This is NOT a hair dryer – keep safe, keep it away from you at all times!

In conclusion, I was able to use my cheap heat gun and cheaper steel pipe to apply enough heat and pressure to re-mold stripped out internal threads, and enough raw heat to let another tool’s edges cut into material that without that tool, would have required digging lots of dirt for these simple irrigation repair projects!

I’m Bill Proctor with many do it yourself projects under my belt. So many, and so varied, that with the encouragement of family and friends, I’ve launched a web site to showcase techniques, and answer questions from people like you.

Heat Gun

Conclusion:

For you who don’t know what a heat gun is, it’s basically a device that looks like a hairdryer. However, this device can blow multiple times hotter airflow than a hairdryer.

Most people already know that this hot blower tool can be used for helping home decorating jobs, like scrapping wallpaper, pulling off paint from its surface, and others.

The high-temperature airflow from a heat gun is extremely useful to let wallpapers and paint starting to melt then you can follow by using a scraper to scrape all the remaining substances.

There are other things that can be done by heat gun that you might not know yet. If you do run a cloth screening business, a heat gun can be a powerful tool to ease and faster the drying process.

Some cloth screening types require a good drying process to get the perfect result and this usually can be done by letting the screens dried themselves under the sunlight or by putting it in the oven.

However, when the sun is not shiny enough you can use a heat gun as a replacement for it.

Just make sure you don’t put the output nozzle too close to the material and move back and forward or else it will get burnt. If you are a sort of toy hobby, you can also use this hot blower tool to get your sculpting hobby done. Simply blow over your device to your PVC or plastic-based material toy model.

Turn it off immediately when you feel the material is soft enough for you to the scalp. Always make sure to blow it in step by step instead of a full constant blow right to the surface as it can melt down your plastic-based material in just seconds.

When you do window tinting, this tool comes in very handy as a finisher. After all your window film set perfectly to all your vehicle’s windows, blast each of those windows with a heat gun from the outside part of your vehicle. This will ensure that your window tinting process is perfectly done.

The most important thing that you have to keep in mind is always to put extra caution when doing all the stuff with a heat gun because it’s extremely hot.

Just to let you know how hot it is, try putting an unlit cigar in front of the output nozzle at a close range and you will be amazed that suddenly your cigar will lighten up in just a minute.

Round Mirrors For Home Decor

Leave a Reply