Dryer Not Spinning? Here Are Best DIY Fixes 2025
A broken drive belt is the most common reason a dryer won’t spin. To fix this issue, turn the drum by hand. A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken.
Dryer Belt Replacement: Replacing a dryer belt costs about $200 if you hire a pro, or $10 to $20 for DIY.
“Goodness, the climate outside is horrible”, from frigid temperatures to slush, downpour, and ice. Winter is unquestionably here, and getting your clothes dry during the season can frequently be troublesome.
On the off chance that your tumble dryer chooses it no longer needs to work, the task is near on-unthinkable.
There are many reasons why a dryer might not spin, including:
- Broken dryer belt: The most common reason for a dryer to stop spinning is a broken belt. The belt wears down over time and needs to be replaced.
- Damaged drum rollers: If the dryer makes a thumping sound, the drum rollers might be damaged and need to be replaced.
- Faulty door switch: A defective door switch can prevent the dryer from turning on, even if the door is closed.
- Broken idler pulley: The idler pulley is one of two pulleys that suspend the drive belt around the drum. If it’s broken, the belt won’t be able to spin the drum.
- Overheating motor: If the dryer runs intermittently or won’t spin, the drive motor might be overheating, which could be a sign of a failing motor.
- Faulty thermal fuse: The thermal fuse is a safety feature that turns off the dryer if it gets too hot. A faulty thermal fuse might cut power to the motor while leaving the heating element on.
- Worn drum bearing: A worn drum bearing can’t support the rear of the drum properly, which can put extra strain on the motor and cause it to stop spinning.
Other reasons a dryer might not spin include an unplugged dryer or a tripped circuit breaker.
A typical deficiency with tumble dryers is they quit spinning. In this post, we clarify the most widely recognized reasons why your tumble dryer has quit spinning and how to fix it, beginning with the most well-known explanation.
How do you fix a dryer that won’t turn on?
Unplug the dryer and check the thermal fuse for continuity. Replace the thermal fuse if the multimeter measures no continuity. Check the exhaust vent because a clog in the vent likely caused the thermal fuse to blow. For dryers with a dial timer, a broken push-to-start switch can prevent the motor from running.
The motor is Running yet Drum isn’t Spinning:
In the event that the drum in your tumble dryer doesn’t turn however the motor is running, by far most of the time you have an issue with the drive belt. It’ll have gotten worn, snapped, or slipped.
Fortunately affirming the drive belt is the issue and fixing it aren’t troublesome errands – and with a tad of persistence and some past resolve, there’s no motivation behind why you cannot return your tumble dryer to its pinnacle execution.
To analyze if the belt is the reason for the drum not pivoting, right off the bat physically turn the drum. It ought to be hardened and hard to turn.
Also Read: Dishwasher is Not Draining
On the off chance that it is, the issue could be one of the different reasons recorded beneath, if the drum turns effectively, the belt is probably going to cause the deficiency.
Affirm the belt is the flaw by eliminating the top of the machine, so, all in all, you ought to have the option to see the belt around the drum.
In the event that it isn’t there or if it’s searching worn out, it will require supplanting and we suggest you watch the “How to Fit a New Belt on a Tumble Dryer” video underneath, to discover how to complete such a fix.
Drum Isn’t Turning and The Motor Isn’t Running:
On the off chance that the lights are blazing on the facade of your tumble dryer and it’s getting power, yet neither the drum pivots nor the machine seems like it is running, there’s a decent possibility either the engine or the beginning capacitor is the reason for the shortcoming.
You can test to see which the reasonable justification is by physically spinning the drum rapidly and afterward shutting the entryway.
On the off chance that the drum keeps on spinning, yet they won’t begin again it’s conceivable the engine capacitor is broken.
It’s important that such a section can hold an awful charge, in any event, when the machine is turned off and unplugged, so in case you will complete the fix according to the “Supplanting a Tumble Dryer Motor Capacitor” video direction beneath, ensure you take additional consideration.
Dryer Not Spinning?
Screeching Noise and No Drum Movement:
The idler pulley gathering is situated close to the drive engine on the lower part of the dryer, and its responsibility is to give strain to the drum belt guaranteeing it doesn’t slip on the drive engine pulley or drum when it’s being used.
You’ll have the option to tell if there’s a shortcoming with the idler pulley gathering as your tumble dryer will start to make a screeching or squeaking commotion, which whenever left can transform into a boisterous pounding clamor.
Another sign the idler pulley get together has built up a shortcoming is the drum pivoting at a much more slow speed than ordinary.
Dryer Not Spinning? Here Are Best DIY Fixes 2023
To access the idler pulley get together on your tumble dryer when the apparatus has been turned off and unplugged, you’ll have to eliminate the too board and a sideboard. Once these have been taken out, you’ll have the option to see the get-together unit.
We initially suggest that you check the spring on the gathering is giving the strain it ought to in the belt, on the off chance that it is take the belt off and test the pulley to ensure it turns openly on the pole.
On the off chance that it doesn’t, or if the spring isn’t giving the right strain, the pulley gathering may be supplanted.
Read Also: How to Find the Best Dryer Repair Company in Halifax
To supplant it, just eliminate the jolts which hold the pulley set up and fit the upgraded one, preceding setting up the belt back.
Defective Door Switch:
Despite the fact that it isn’t the most widely recognized explanation behind your tumble dryer to quit spinning, a flaw with the entryway switch can bring about such issues happening.
Shockingly, after some time because of the steady opening and shutting of the tumble dryer entryway the switch can build up a shortcoming, forestalling a strong association.
This thus keeps the tumble dryer from perceiving that the drum needs to tumble.
We suggest you test the entryway switch’s progression by utilizing a multimeter. You ought to get a perusing of zero ohms when the entryway is shut/the catch is discouraged.
Realizing how to determine issues to have your tumble dryer and how to fix them will assist you with setting aside cash in both the short and long haul.
It’ll additionally assist you with keeping up your apparatus to its maximum capacity for more, which means whatever the climate outside is doing you can in any case get your clothing dry.
Samsung Dryer Not Spinning? Here Are Best DIY Fixes 2024
Unfortunately, if your dryer isn’t spinning, it usually means that service is required. There’s one quick test to perform to make sure that the cycle is being started correctly. And of course make sure it’s not something as simple as Child Lock.
Check for an error code
If something is preventing the dryer from starting, it may be displaying an error code or blinking lights to explain why. Troubleshoot the error code first and it may resolve the issue with the dryer starts.
Make sure Child Lock is off
Child Lock stops the Start button from working, so if you’re trying to start a cycle and the drum won’t spin, it could be Child Lock. You can check by looking to see if the icon is lit.
Depending on your dryer model, the Child Lock icon may look different. It may look like a baby or a lock with a smiley face.
If it is lit, the instructions to turn it off can be found in your user manual or you can refer to your control panel (you’ll need to press and hold two buttons for three or more seconds).
If you experience difficulty turning off Child Lock, you can also unplug the dryer or turn off the circuit breaker for 60 seconds, and then plug the dryer back in or turn the circuit breaker back on.
Samsung dryer Child Lock icons
Start a cycle to check if the dryer thinks a cycle is running. The previous steps should resolve any issues with a cycle starts. But if your drum still doesn’t spin, then all that’s left is to perform a quick check to confirm that a cycle is actually running while the drum isn’t spinning.
With the panel free of error codes and Child Lock, select Time Dry, and then touch and hold Start. If the timer counts down even though the drum isn’t spinning, request service.
In the vast majority of cases, the timer will count down. If the timer counts down but the drum doesn’t spin, visit our Support Center to request service.
If the timer doesn’t count down after two minutes (or for models without a digital timer), confirm you have started the cycle.
Verify that Time Dry is selected, the door is firmly closed and then touch Start. If you’ve verified that you’ve started the cycle but the drum still doesn’t spin, then visit our Support Center to request service.
whirlpool dryer not spinning belt not broken
Whirlpool is one of the largest manufacturers of dryers in the world. They make a reliable product, so when a Whirlpool dryer won’t spin, you want to get to the bottom of it. We’ll explain how to fix a whirlpool dryer issue with some simple troubleshooting.
If Your Whirlpool or Kenmore Dryer Won’t Spin, Try This.
So your Whirlpool dryer has stopped spinning? Check out these common reasons why this could be happening.
Broken Idler Pulley: When the drive belt is intact but you still have a Whirlpool dryer not spinning issue, the idler pulley may be defective. … Access the idler pulley inside the dryer cabinet. If it appears to be bent, broken, or not spinning freely, replace the pulley.
Faulty Drum Rollers
Dryers use several drum rollers to provide support for the drum while it spins. If your Whirlpool dryer won’t spin properly, the drum rollers may be worn out.
Also Read: Does planet fitness have showers Towels & Lockers
You can check the rollers for wear and tear to see if they turn easily. If any of the drum rollers are damaged or don’t spin easily, we recommend replacing all of them at the same time as a preventative measure.
Drive Motor Failure
A dryer drive motor is what turns the drum during a cycle. If your dryer runs intermittently, the drive motor could be overheating, shutting off the dryer while it cools down. If you suspect drive motor failure, we recommend that you call a professional for service.
For factory authorized Whirlpool appliance repair, Stratford, you won’t find better service than with A+ Appliance. Call us right away if you’re still having issues with your model.
Dryer Drum Obstructed
Do you have a Whirlpool dryer drum not turning? Inevitably, there are times when we forget to remove everything from the pockets of our clothes before they go through the wash.
Small objects such as pen caps, coins, and other foreign material can get lodged in the dryer drum and prevent it from rotating.
Look closely inside the dryer drum with a flashlight. If you see any objects stuck between the drum and dryer housing, use a strong tool, such as needle nose pliers, to remove the object. If there is nothing visible, continue troubleshooting.
Damaged Drive Belt
A damaged drive belt can be the cause if your Whirlpool dryer won’t spin. Try to manually spin the drum from inside the dryer. If the drum spins easily, your Whirlpool dryer belt is broken.
Normal wear and tear can damage the drive belt over time. If it’s loose, frayed, or otherwise damaged, you’ll need to replace the part.
Dryer Heating Element Cost
Unplug the dryer when checking the heating element. It is a long coil of wire inside a metal can. Check it with an ohm meter. If there is no continuity, replace the heating element.
For the cost of parts and labor, you should budget at least $170 to $280 for a new heating element. An appliance technician typically charges between $80 and $100 per hour for labor. This cost also includes a one-time service fee. Most technicians’ service fees span from $50 to $80.
Read: Clogged Kitchen Sink
Kenmore Dryer stopped spinning – The belt not broken
It’s a common problem: You put a load of wet towels in the Kenmore dryer, only to discover that your dryer won’t spin. There are a variety of issues that might be causing your dryer not to spin, so how can you determine the source of the problem?
Start by checking whether or not your Kenmore dryer is plugged in. If it is, check your circuit breaker box to ensure that the dryer’s two circuit breakers are both turned on. If they aren’t, reset them.
Friends, If the plug and circuit breakers are fine, check the dryer’s door switch. When you close the dryer door, a plastic peg should click and allow the switch to start the Kenmore dryer.
If the peg is bent or broken, you’ll need to straighten or replace the peg. If the peg is fine, the switch has probably failed and will need to be replaced.
Friends, If your Kenmore dryer starts, but the drum won’t spin, it’s probably due to one of these common reasons.
1. Drive Belt
The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. Over time, the belt can break from normal use. If the belt is broken, the dryer won’t turn.
To quickly determine if the belt is broken, reach into the dryer and turn the drum by hand. If the drum spins very easily, the belt is likely broken. Next, inspect the belt to confirm that it is broken. If the belt is broken, replace it.
2. Drum Roller
One or more of the drum rollers might be worn out. Most dryers have two drum support rollers on the rear of the drum, and some dryers have two more rollers supporting the front of the drum. The rollers must spin freely to work properly.
If the rollers don’t spin freely, the motor will get overloaded and the dryer will stop. If the drum rollers are worn out, the rollers may not spin freely. To determine if the support rollers are worn out, remove the belt from the dryer and try turning the drum by hand. If the drum does not rotate freely, check the support rollers for wear.
If one or more of the rollers don’t turn freely, we recommend replacing all of the rollers at the same time as a preventative measure. (The roller shaft can often be reused if it is in good condition. Clean the shaft thoroughly before installing the new rollers.)
3. Drum Support Roller & Axle
One or more of the drum roller axles might be worn out. Most dryers have two drum support rollers on the rear of the drum, and some dryers have two more rollers supporting the front of the drum. The rollers must spin freely to work properly.
If the drum roller axles are worn out, the rollers may not spin freely, causing the motor to overload and the dryer to stop. To determine if the drum roller axles are worn out, remove the belt from the dryer and try turning the drum by hand. If the drum does not rotate freely, check the axles for wear.
Friends, If the rollers spin freely without wobbling, the axles do not need to be replaced. If the roller wobbles and/or does not spin freely, we recommend replacing all of the axles and rollers as a preventative measure.
4. Drum Slide, Glide, or Pad
If the dryer stops turning during the cycle, one or more of the drum glides (also called slides) might be worn out. The drum glides are small plastic pieces that support the front of the dryer drum. As the drum rotates, it slides on these plastic pieces.
Over time, the drum glides wear out. If the drum glides are worn out, the drum can start binding and put a strain on the motor. If this happens, the motor shuts down, preventing the dryer from turning. To determine if the drum glides are worn out, inspect them for wear. If the glides are worn out, replace all of the glides as a set.
5. Drum Bearing
The drum bearing supports the rear of the dryer drum. Over time, this bearing wears out. If the drum bearing is worn out, it might put too much strain on the motor, causing the dryer to stop mid-cycle.
To determine if the drum bearing is at fault, remove the dryer belt and try turning the drum by hand. If the drum rotates freely, it is unlikely that the drum bearing is worn out. If the drum makes squealing or grinding sounds when turned and/or is hard to turn, check the drum bearing and replace it if necessary.
Read: What to do When your Washing Machine Won’t Drain
6. Drum Roller Axle
One or more of the drum roller axles might be worn out. Most dryers have two drum support rollers on the rear of the drum, and some dryers have two more rollers supporting the front of the drum.
The rollers must spin freely to work properly. If the roller axles are worn out, the rollers may not spin freely, causing the motor to overload and the dryer to stop.
To determine if the drum roller axles are worn out, remove the belt from the dryer and try turning the drum by hand. If the drum does not rotate freely, check the support rollers for wear.
Friends, If the rollers spin freely without wobbling, the axles do not need to be replaced. If a roller wobble and/or does not spin freely, we recommend replacing all of the axles and rollers as a preventative measure.
7. Drive Motor
The drive motor turns the drum and the blower wheel to exhaust the air. If the dryer runs, stops for a while, and then starts again, this likely indicates that the motor is overheating, causing the dryer to shut off until the motor cools down.
First, remove the belt from the motor and check the blower wheel to ensure that it is not obstructed.
Next, with the belt removed, try rotating the drum by hand. If the drum does not rotate freely, determine what is causing the drum to bind.
Friends, If the drum turns freely and the blower wheel is clear of obstructions, the drive motor might be defective. If you suspect the motor is at fault, replace it.
8. Drum Support Bearing
The drum bearing supports the rear of the dryer drum. Over time, this bearing wears out. If the drum bearing is worn out, it might put too much strain on the motor, causing the dryer to stop mid-cycle.
To determine if the drum bearing is at fault, remove the dryer belt and try turning the drum by hand. If the drum rotates freely, it is unlikely that the drum bearing is worn out.
If the drum makes squealing or grinding sounds when turned and/or is hard to turn, replace the drum bearing.
9. Dryness Control Board
The dryness control board shuts off the dryer when the clothes have reached the proper level of dryness. If the control board is defective, it may cause the dryer to stop too early.
However, this is rarely the case. Before replacing the control board check all the more commonly defective parts. If you determine that all of the other parts are working properly, replace the dryness control board.
DryDryer Not Spinning? Here Are Best DIY Fixes 2023