3 Simple Ways to Dry Wet Carpet
One of the biggest headaches for any homeowner is a flooded basement. It’s also such a comfort to step on a fluffy dry carpet. It’s therefore critical to take action fast once you notice a damp or soaked carpet. A wet carpet encourages mould growth that could be detrimental to your health and that of your pets.
It’s really straightforward – all you need to do is sprinkle a generous among of baking soda over your wet carpet and let it sit. The baking soda not only absorbs moisture, but it’ll also absorb any nasty odours.
Ways to Dry a Wet Carpet
Before taking action, experts at ‘58 foundations suggest that it’s essential to consider how soaked your carpet is, how widespread the damp area is, how long the carpet has been damp, and the source of the water. Flooded basements could be from burst pipes, broken sump pipes, seepage through cracks, and an oversaturated foundation. The first step should be stopping the water source and then following the three steps below.
1. Extract as Much Water as Possible
A flooded basement has standing water to remove. Before getting to the carpet, it is essential to first remove as much water as possible. Depending on how much water is on the floor, you can use a wet-dry vacuum or a pump. Keep moving the vacuum on the carpet or the entire flooded part until the vacuum takes up no more water. You could also use a hot water extraction unit. Such a unit assists in sucking up water from the carpet and could be rented from the carpet cleaning company near you.
By walking across the carpet, you can tell whether your carpet still has water either on top or beneath. Please do not use an ordinary vacuum cleaner because it cannot get much water off the floor.
2. Raise the Carpet Off the Floor.
Raising the carpet off the floor creates airflow and allows for faster drying. Use either work gloves or pliers to separate the carpet and the floor padding. You could also pull the carpet off its installation strips by the corners and fold the corners to expose the carpet pads.
3. Blow Air In Between The Carpet and Its Padding
If, for instance, the subfloor seems dry and the pads are just a little damp, rent a dehumidifier, put it on and close the room. This will pull out water fast. You can then use a heated-up blow dryer and blow air between the pads and the carpet starting from the lifted sides. You can open the windows as this will aid in fast drying.
Attaching a vacuum hose that vacuums wet things to the vacuum’s exhaust and then placing the hose under the carpet will cause the hot air to speed up the carpets drying from beneath. After the carpet is fully dry, it’s essential to conduct moisture tests to ensure that there are no hidden water pockets because trapped moisture is a perfect breeding ground for mildews and moulds.
Do Not Wait
Once you have noticed a damp area or found your basement carpet soaked, it’s critical to act promptly because moulds can grow even within the first 24 hours. Drying wet basement carpet can seem like a real hassle, but following the above steps, you could get your carpet dry with little effort.
3 Simple Ways to Dry Wet Carpet